| FIRST STEP LENGTH | 0.025 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.875 INCHES NOMINAL |
| HEAD STYLE | BEVEL |
| HEIGHT | 0.625 INCHES NOMINAL |
| INTERNAL DRIVE STYLE | SOCKET |
| OVERALL LENGTH | 1.766 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OVERALL |
| NUMERIC DESIGNATION OF STEP ECCENTRIC TO HEAD | 2 |
| OFFSET DISTANCE BETWEEN GEOMETRIC CENTER OF HEAD AND CENTERLINE OF SHANK/SHOULDER | 0.062 INCHES NOMINAL |
| PIN HEAD DIAMETER | 0.375 INCHES NOMINAL |
| RELIEF UNDER HEAD DIAMETER | 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| RELIEF UNDER HEAD LENGTH | 0.641 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.375 INCHES NOMINAL |
| SECOND STEP LENGTH | 0.861 INCHES NOMINAL |
| WIDTH BETWEEN FLATS | 0.187 INCHES NOMINAL |
| STYLE DESIGNATOR | ECCENTRIC |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |