5315-00-007-9851, PIN,STRAIGHT,HEADLESS

National Stock Number:
5315-00-007-9851

Federal Supply Class:
5315

National Item Identification Number:
000079851

Description:
PIN,STRAIGHT,HEADLESS

Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.

Manufacturer Information:

5315PL1360904	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS16556-654	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FIRST END TAPER ANGLE	20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM
FIRST END TAPER LENGTH	0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
FIRST END STYLE	CHAMFERED
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	FED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 410 OR STEEL COMP 416 OVERALL
PIN OVERALL DIAMETER	0.3134 INCHES MINIMUM AND 0.3136 INCHES MAXIMUM
PIN OVERALL LENGTH	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
SECOND END TAPER ANGLE	4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
SECOND END TAPER LENGTH	0.035 INCHES NOMINAL
SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
SECOND END STYLE	CHAMFERED
SHEAR STRENGTH	11000 DOUBLE POUNDS PER SQUARE INCH
SPECIAL FEATURES	SMALL CHAMFER END MAY HAVE 0.031 IN. MIN 0.062 IN.MAX RADIUS IN LIEU OF CHAMFER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL

Click here to Register for Free 30-day Trial