|
|
|
National Stock Number:
5315-00-008-9066
Federal Supply Class:
5315
National Item Identification Number:
000089066
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 3M39C5-23 | 76301 | THE BOEING COMPANY | | MS9466-13 | 0U583 | SAE INTERNATIONAL | | MS9466-13 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS9466-13 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | P053-5-23 | 81755 | LOCKHEED MARTIN CORPORATION | | SAE AS9466A | 0U583 | SAE INTERNATIONAL | | SAE AS9466A | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SM-B-435903 | 81337 | W1D1 NATICK SOLDIER CENTER | | SMB435903-1 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| CHAMFER LENGTH | 0.078 INCHES NOMINAL | | DIAMETER | 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.1145 INCHES MINIMUM AND 0.1565 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 3140 OR STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.500 INCHES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | UNDER HEAD LENGTH | 0.897 INCHES MINIMUM AND 0.917 INCHES MAXIMUM |
|
|