|
|
|
National Stock Number:
5315-00-013-7137
Federal Supply Class:
5315
National Item Identification Number:
000137137
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 12Z48-811 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 137137 | 24617 | GENERAL MOTORS CORP | | 137137 | 7X677 | GENERAL MOTORS LLC | | 201030004 | T6472 | SAMSUN YURT SAV.SAN. VE TIC.A.S. | | 42P6485-250 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 5315000137137 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315PL0919517 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 53309 | 34623 | AM GENERAL LLC | | FFP386 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS24665-814 | 65029 | MATTHEW WARREN, INC | | MS24665-814 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24665-814 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM24665 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | PDG6120-1/16-1/ | 18631 | PRODUCT DEVELOPMENT GROUP INC |
|
Techincal Specification:
| DIAMETER | 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM E30 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | B TYPE | | STYLE DESIGNATOR | STANDARD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DOD-P-16232 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL | | UNDERLOOP LENGTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
|
|