| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.141 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.015 INCHES MINIMUM AND 0.047 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.219 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| HEAD STYLE | FLUSH |
| HEIGHT | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OVERALL |
| PIN HEAD DIAMETER | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.186 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.625 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| UNDER HEAD LENGTH | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |