| EFFECTIVE LENGTH | 0.6378 INCHES MINIMUM AND 0.6398 INCHES MAXIMUM |
| DIAMETER | 0.3116 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.169 INCHES MINIMUM AND 0.179 INCHES MAXIMUM |
| FEATURES PROVIDED | CASEHARDENED |
| FIRST HOLE DIAMETER | 0.0625 INCHES MINIMUM AND 0.0629 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL |
| GRIP LENGTH | 0.671 INCHES NOMINAL |
| HARDNESS RATING | 89.0 ROCKWELL SUPERFICIAL 15-N NOMINAL OVERALL |
| HEIGHT | 0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM |
| HEAD STYLE | FLAT |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL | STEEL OVERALL |
| PIN HEAD DIAMETER | 0.875 INCHES NOMINAL |
| STYLE DESIGNATOR | GROOVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
| UNDERCUT DIAMETER | 0.300 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |