|
|
|
National Stock Number:
5315-00-024-8212
Federal Supply Class:
5315
National Item Identification Number:
000248212
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 1368215PC3 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | HEAD STYLE | FLAT | | MATERIAL | STEEL COMP 8640 OVERALL | | STYLE DESIGNATOR | GROOVE | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM OVERALL | | DIAMETER | 0.495 INCHES MINIMUM AND | | 0.497 INCHES MAXIMUM | | EFFECTIVE LENGTH | 1.686 INCHES MINIMUM AND | | 1.691 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.432 INCHES MINIMUM AND | | 0.437 INCHES MAXIMUM | | UNDER HEAD LENGTH | 1.875 INCHES MINIMUM AND | | 1.895 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.108 INCHES MINIMUM AND | | 0.113 INCHES MAXIMUM | | SECOND UNDERCUT DIAMETER | 0.475 INCHES MINIMUM AND | | 0.477 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.015 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.677 INCHES MINIMUM AND | | 0.697 INCHES MAXIMUM | | HEIGHT | 0.125 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
|
|