|
|
|
National Stock Number:
5315-00-032-5610
Federal Supply Class:
5315
National Item Identification Number:
000325610
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 4F55524-101A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | HEAD STYLE | FLUSH | | MATERIAL | STEEL COMP 630 OVERALL | | STYLE DESIGNATOR | GROOVE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | STP58-301,98897 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | DIAMETER | 0.7495 INCHES MINIMUM AND | | 0.7505 INCHES MAXIMUM | | EFFECTIVE LENGTH | 0.995 INCHES MINIMUM AND | | 1.000 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.704 INCHES NOMINAL | | UNDER HEAD LENGTH | 1.980 INCHES NOMINAL | | UNDERCUT WIDTH | 0.046 INCHES NOMINAL | | FIRST END TAPER LENGTH | 0.490 INCHES NOMINAL | | FIRST END TAPER ANGLE | 7.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 1.000 INCHES NOMINAL | | HEIGHT | 0.090 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.251 INCHES MINIMUM AND | | 0.258 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.380 INCHES NOMINAL | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | 4F55524-101A |
|
|