| CHAMFER LENGTH | 0.750 INCHES NOMINAL0.750 INCHES NOMINAL |
| DIAMETER | 0.7475 INCHES MINIMUM AND 0.7475 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM0.7480 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 6.250 INCHES NOMINAL6.250 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.250 INCHES NOMINAL0.250 INCHES NOMINAL |
| HEAD LENGTH | 3.250 INCHES MINIMUM AND 3.250 INCHES MINIMUM AND 3.750 INCHES MAXIMUM3.750 INCHES MAXIMUM |
| HEAD STYLE | TEE NO. 5TEE NO. 5 |
| HOLE ARRANGEMENT STYLE | DRILLED THRU HEADDRILLED THRU HEAD |
| LANYARD LENGTH | 14.000 INCHES NOMINAL14.000 INCHES NOMINAL |
| PIN ATTACHMENT TYPE | CABLE LANYARD W/TERMINATIONSCABLE LANYARD W/TERMINATIONS |
| PIN CHAMFER ANGLE | 8.0 DEGREES MINIMUM AND 8.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM12.0 DEGREES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHTSTRAIGHT |
| TEE BOLT CYLINDRICAL HEAD DIAMETER | 1.000 INCHES NOMINAL1.000 INCHES NOMINAL |
| UNDER HEAD LENGTH | 5.875 INCHES MINIMUM AND 5.875 INCHES MINIMUM AND 6.125 INCHES MAXIMUM6.125 INCHES MAXIMUM |
| WELDING PROJECTION LOCATION AND QUANTITY | 1 HEAD TOP1 HEAD TOP |