|
|
|
National Stock Number:
5315-01-371-4774
Federal Supply Class:
5315
National Item Identification Number:
013714774
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12412461 | 076M6 | AMZ ALABAMA INC. | | 12412461 | 0FW39 | BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP | | 12412461 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 12412461 | 65459 | LANDOLL COMPANY, LLC | | 12412461 | 81381 | STEWART & STEVENSON POWER PRODUCTS LLC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 8.930 INCHES NOMINAL8.930 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.310 INCHES NOMINAL0.310 INCHES NOMINAL | | FIRST END STYLE | CHAMFEREDCHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL | | FIRST HOLE DIAMETER | 0.110 INCHES MINIMUM AND 0.110 INCHES MINIMUM AND 0.135 INCHES MAXIMUM0.135 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.124 INCHES MAXIMUM0.124 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLEDBOTH END DRILLED | | MATERIAL | STEEL COMP 1018 OVERALLSTEEL COMP 1018 OVERALL | | PIN OVERALL DIAMETER | 0.5000 INCHES NOMINAL0.5000 INCHES NOMINAL | | PIN OVERALL LENGTH | 9.250 INCHES NOMINAL9.250 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.110 INCHES MINIMUM AND 0.110 INCHES MINIMUM AND 0.135 INCHES MAXIMUM0.135 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICALIDENTICAL |
|
|