|
|
|
National Stock Number:
5315-01-371-5158
Federal Supply Class:
5315
National Item Identification Number:
013715158
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 75D131052-2007 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.640 INCHES NOMINAL5.640 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.180 INCHES NOMINAL0.180 INCHES NOMINAL | | FIRST END STYLE | CHAMFEREDCHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL0.060 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.156 INCHES MINIMUM AND 0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM0.160 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLEDBOTH END DRILLED | | MATERIAL | STEEL COMP 304 OVERALLSTEEL COMP 304 OVERALL | | PIN OVERALL DIAMETER | 0.3750 INCHES NOMINAL0.3750 INCHES NOMINAL | | PIN OVERALL LENGTH | 6.000 INCHES NOMINAL6.000 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.156 INCHES MINIMUM AND 0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM0.160 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICALIDENTICAL |
|
|