|
|
|
National Stock Number:
5315-01-374-8535
Federal Supply Class:
5315
National Item Identification Number:
013748535
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 5497375-7 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5497375-7 | 61427 | ATLAS MACHINE COMPANY, INC. | | NOR5497375 006 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 5982305,CAGEC 61427 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | FIRST HOLE DIAMETER | 0.500 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 1.479 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.9930 INCHES MINIMUM AND | | 0.9940 INCHES MAXIMUM | | SPECIAL FEATURES | HOLE IS 20UNF-2B THREADED LEFT HAND WITH 0.620 IN. WIDE SQUARE CUT OUTS ON BOTH ENDS |
|
|