|
|
|
National Stock Number:
5315-01-448-7146
Federal Supply Class:
5315
National Item Identification Number:
014487146
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 701-4323644 ITEM 22 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 701-4323695 SH 2 PC 32 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 701-4323731 SH10 P/N 56 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 701-5941244 ITEM 1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 701-5941244 PIECE 1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 701-5941244 SH 3 PC 1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 701-5941244 SH3 ITEM 1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 701-6600336 SH 1 PC 20 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 701-6776800 SH 6 PC 20 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 701-6938582 SH 1 PC 20 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.249 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.188 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL LENGTH | 2.625 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL |
|
|