|
|
|
National Stock Number:
5315-01-450-1125
Federal Supply Class:
5315
National Item Identification Number:
014501125
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12470483 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| FIRST END STYLE | POINTED | | FIRST END TAPER ANGLE | 10.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 4.000 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.6100 INCHES NOMINAL | | PIN OVERALL LENGTH | 5.020 INCHES NOMINAL | | SECOND END STYLE | SQUARE | | SECOND END TAPER ANGLE | 90.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.500 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SPECIAL FEATURES | PIN IS 5.03 INCHES LONG OVERALL, .610 INCHES IN DIAMETER. ROUND OVERALL WITH A FLAT SURFACE ON ONE SIDE WITH A SLIGHT TAPER FROM TIP TO OPPOSITE END. FEATURES FOUR HOLES OF .154 INCHES DIAMETER DRILLED PERPENDICULAR TO LENGTH ON THE SMALLER END.HOLES ARE APPROX. .50 FROM THE TIP AND .594 INCHES CENTER TO CENTER. FEATURES ONE HOLE OF .279 INCHES DIAMETER DRILLED PERPENDICULAR TO LENGTH AT LARGEST END AND OFFSET .120 IN. FROM OUTSIDE EDGE. |
|
|