|
|
|
National Stock Number:
5315-01-460-0343
Federal Supply Class:
5315
National Item Identification Number:
014600343
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 12387350-5C105 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| UNDER HEAD LENGTH | 3.459 INCHES MINIMUM AND | | 3.479 INCHES MAXIMUM | | DIAMETER | 0.371 INCHES MINIMUM AND | | 0.372 INCHES MAXIMUM | | HEAD STYLE | FLAT | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 4037 OR | | STEEL COMP 4130 OR | | STEEL COMP 8630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6300 ASSN STD 1ST MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 1.9.2.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SHEAR STRENGTH | 16580 DOUBLE POUND | | CHAMFER LENGTH | 0.078 INCHES NOMINAL | | PIN CHAMFER ANGLE | 0.015 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.552 INCHES MINIMUM AND | | 0.572 INCHES MAXIMUM | | HEIGHT | 0.052 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.096 INCHES MINIMUM AND | | 0.117 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.167 INCHES MINIMUM AND | | 0.187 INCHES MAXIMUM | | SPECIAL FEATURES | THIS ITEM IS THE SAME AS MS20392-5C105 EXCEPT THE FINSH IS ZINC INSTEAD OF CADMIUM |
|
|