|
|
|
National Stock Number:
5315-01-470-7012
Federal Supply Class:
5315
National Item Identification Number:
014707012
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| AMS 5616K | 0U583 | SAE INTERNATIONAL | | AMS 5616K | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | AS9843 | 0U583 | SAE INTERNATIONAL | | AS9843 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS9843-04 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CHAMFER LENGTH | 0.030 INCHES NOMINAL | | DIAMETER | 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.036 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 615 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, STRAIGHT HEADED, .1249 DIAMETER | | PIN CHAMFER ANGLE | 20.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | SPECIAL FEATURES | END ITEM F15 MN LND GR;;FLOURESCENT PENETRANT INSPECTION PER AMS 2645;UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 MICROINCHES;BREAK SHARP EDGES .003 TO .015;HEAD CORNER RADIUS .020;UNDERHEAD RADIUS .005 TO .010;HOLE LOCATION 0.253 INCHES FROM UNDERSIDE OF HEAD;HOLE DIAMETER .065 TO .070 | | STYLE DESIGNATOR | STRAIGHT | | UNDER HEAD LENGTH | 0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
|
|