|
|
|
National Stock Number:
5320-01-354-4257
Federal Supply Class:
5320
National Item Identification Number:
013544257
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| CR2644-6-9 | 11815 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM | | MATERIAL | NICKEL ALLOY 600 LOCKING RING | | IRON ALLOY 660 SLEEVE | | IRON ALLOY 660 STEM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5687 ASSN STD SINGLE MATERIAL RESPONSE LOCKING RING | | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE | | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE STEM | | SURFACE TREATMENT | PASSIVATE SLEEVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE | | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH | | HEAD MAJOR DIAMETER | 0.295 INCHES MINIMUM AND | | 0.303 INCHES MAXIMUM | | COUNTERSINK ANGLE | 89.5 DEGREES MINIMUM AND | | 101.5 DEGREES MAXIMUM | | FASTENER LENGTH | 0.678 INCHES MINIMUM AND | | 0.698 INCHES MAXIMUM | | SHANK DIAMETER | 0.186 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | GRIP LENGTH | 0.501 INCHES MINIMUM AND | | 0.562 INCHES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | LUBRICATION | DRY FILM |
|
|