| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SHANK STYLE | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| MATERIAL | STEEL COMP 4130 OR |
| STEEL COMP 8740 BOLT |
| STEEL COMP 4130 OR |
| STEEL COMP 4140 OR |
| STEEL COMP 8740 NUT |
| STEEL COMP 303 OR |
| STEEL COMP 304 SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR |
| MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
| MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE BOLT |
| CADMIUM AND |
| CHROMATE NUT |
| CADMIUM SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND |
| 46.0 ROCKWELL C MAXIMUM BOLT |
| 39.0 ROCKWELL C MINIMUM AND |
| 46.0 ROCKWELL C MAXIMUM NUT |
| MINIMUM TENSILE STRENGTH | 14000 POUNDS PER SQUARE INCH |
| HEAD MAJOR DIAMETER | 0.2966 INCHES MINIMUM AND |
| 0.3016 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND |
| 101.0 DEGREES MAXIMUM |
| SHANK DIAMETER | 0.2016 INCHES MINIMUM AND |
| 0.2026 INCHES MAXIMUM |
| GRIP LENGTH | 0.657 INCHES MINIMUM AND |
| 0.719 INCHES MAXIMUM |
| EXPANSION DEVICE | THREADED STEM |
| LUBRICATION | WAX OR |
| CETYL ALCOHOL OR |
| SOLID FILM |
| FEATURES PROVIDED | SELF-LOCKING |