|
|
|
National Stock Number:
5330-00-027-3599
Federal Supply Class:
5330
National Item Identification Number:
000273599
Description:
RETAINER,PACKING
Detail:
An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE.
|
Manufacturer Information:
| 026-00501CP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 0X026-00501 | 26505 | GROVE VALVE OPERATIONS | | 0X026-00501CP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 0X026-00501CP | 26505 | GROVE VALVE OPERATIONS | | 4460331-0128 | 99657 | MAROTTA CONTROLS INC | | 4460331-0128CP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | AC-A665EP-2 ITEM 4 | 18350 | PALL AEROPOWER CORPORATION | | AC-A665EP-2 ITEM 4CP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | MS28774 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS28774-015 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS28774-015CP | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | MS28774-015CP | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS8791 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| CENTER HOLE DIAMETER | 0.580 INCHES NOMINAL | | CROSS SECTION OUTSIDE DIAMETER | 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | ZZZW | | CROSS-SECTIONAL SHAPE STYLE | O-RING | | CROSS-SECTIONAL HEIGHT | 0.052 INCHES MAXIMUM | | CUT TYPE | DIAGONAL OVERALL | | DEPARTURE FROM CITED DOCUMENT | CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D | | JOINT TYPE | SCARF-PERIPHERAL RETAINER | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OVERALL | | PERIPHERAL DIAMETER | 0.683 INCHES MINIMUM AND 0.689 INCHES MAXIMUM |
|
|