| FIRST LEG ANGLE | 135.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.150 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.265 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.055 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.765 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 2024 |
| MOUNTING HOLE TYPE | COUNTERSUNK |
| SPECIAL FEATURES | ALL HOLES ARE DRILLED THRU FIRST AND SECOND LEG THICKNESS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | EXTENDED FLAT |
| SECOND LEG THICKNESS | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.125 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.875 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.600 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |