| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG END WIDTH | 5.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.990 INCHES MINIMUM AND 5.010 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.188 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| FIRST LEG WIDTH | 5.750 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1010 |
| SECOND LEG END WIDTH | 3.500 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.000 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| SECOND LEG WIDTH | 3.750 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL2 FED SPEC ALL TREATMENT RESPONSES |
| SURFACE TREATMENT | CADMIUM AND CHROMATE |