|
|
|
National Stock Number:
5340-00-021-1989
Federal Supply Class:
5340
National Item Identification Number:
000211989
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 10885130 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 9.310 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL | | CENTER SECTION WIDTH | 9.000 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 1.750 INCHES NOMINAL | | FIRST LEG SLOT LENGTH | 0.820 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.030 INCHES NOMINAL | | FIRST LEG WIDTH | 9.000 INCHES NOMINAL | | FIRST LEG SLOT WIDTH | 0.530 INCHES NOMINAL | | FIRST LEG THICKNESS | 0.250 INCHES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 6.430 INCHES MINIMUM AND 6.450 INCHES MAXIMUM | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.464 INCHES MINIMUM AND 0.484 INCHES MAXIMUM | | SECOND LEG LENGTH | 2.300 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.550 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG WIDTH | 9.000 INCHES NOMINAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | SECOND SLOT ON FIRST LEG HOLE ARRANGEMENT STYLE WITH SAME DIMENSIONSAS OPPOSITE SIDE | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|