| CENTER SECTION HEIGHT | 0.786 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST LEG END WIDTH | 0.132 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.156 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.156 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.312 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.437 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 83.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.700 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.154 INCHES MINIMUM AND 0.158 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.630 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.200 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TY 1 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |