|
|
|
National Stock Number:
5340-01-367-1824
Federal Supply Class:
5340
National Item Identification Number:
013671824
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 1348AS111 | 02387 | NAVAL AIR WARFARE CENTER AIRCRAFT DIV | | 1348AS111 | 072E5 | VERTEX MODERNIZATION AND SUSTAINMENT LLC | | 1348AS111 | 09245 | SOLO ENTERPRISE CORP. | | 1348AS111 | 0PXV4 | THE BOEING COMPANY | | 1348AS111 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 1348AS111 | 32067 | MARVIN ENGINEERING CO, INC | | 1348AS111 | 4AAQ0 | GARRITY TOOL COMPANY, LLC | | 1348AS111 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.500 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.563 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.312 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.255 INCHES MINIMUM AND 0.264 INCHES MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS AND TAPERED | | FIRST LEG THICKNESS | 0.190 INCHES NOMINAL | | FIRST LEG WIDTH | 2.500 INCHES NOMINAL | | FIRST LEG LENGTH | 1.437 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367 T75 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG THICKNESS | 0.190 INCHES NOMINAL | | SECOND LEG LENGTH | 1.437 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SPECIAL FEATURES | TWO HOLES ON CENTER SECTION,0.395 IN. MIN AND 0.412 IN. MAX DIA | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83286 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PLASTIC POLYURETHANE |
|
|