| CENTER SECTION HEIGHT | 70.0 MILLIMETERS NOMINAL |
| CENTER SECTION THICKNESS | 8.0 MILLIMETERS NOMINAL |
| CENTER SECTION WIDTH | 79.0 MILLIMETERS MINIMUM AND 81.0 MILLIMETERS MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 26.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 14.0 MILLIMETERS NOMINAL |
| FIRST LEG END WIDTH | 19.0 MILLIMETERS MINIMUM AND 21.0 MILLIMETERS MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 52.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 72.0 MILLIMETERS MINIMUM AND 74.0 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 79.0 MILLIMETERS MINIMUM AND 81.0 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 GR 36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 72.0 MILLIMETERS MINIMUM AND 74.0 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYURETHANE |