| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 50.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 11.0 MILLIMETERS MINIMUM AND 11.4 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 49.5 MILLIMETERS NOMINAL |
| FIRST LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 98.8 MILLIMETERS MINIMUM AND 101.2 MILLIMETERS MAXIMUM |
| FIRST LEG LENGTH | 95.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A607 GR 405 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 15.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 60.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 185.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 50.0 MILLIMETERS NOMINAL |
| SECOND LEG END WIDTH | 40.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 13.2 MILLIMETERS MINIMUM AND 13.5 MILLIMETERS MAXIMUM |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 98.8 MILLIMETERS MINIMUM AND 101.2 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYURETHANE |