| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.437 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.380 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.130 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.620 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG WIDTH | 4.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SPECIAL FEATURES | 5/16-18UNC02B THREADS FOR THE ONE MTG HOLE IN SECOND LEG; DWG NAME-AXLE DISCONNECT CONTROL BRACKET; PRIME LAW MIL-P-53030 OR MIL-P-52192 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.630 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.880 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 37.500 INCHES NOMINAL |
| SECOND LEG END WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.312 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 4.000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-53039 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-C-46168 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PLASTIC POLYURETHANE |