|
|
|
National Stock Number:
5340-01-371-4755
Federal Supply Class:
5340
National Item Identification Number:
013714755
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| SW33293 | 5RQL2 | DRS ENVIRONMENTAL SYSTEMS INC | | SW33293 | 98255 | DRS SUSTAINMENT SYSTEMS INC |
|
Techincal Specification:
| CENTER SECTION WIDTH | 1.000 INCHES NOMINAL | | CENTER SECTION HEIGHT | 7.500 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.120 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.405 INCHES MINIMUM AND 0.418 INCHES MAXIMUM | | FIRST LEG LENGTH | 1.250 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.750 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.120 INCHES NOMINAL | | SECOND LEG LENGTH | 1.250 INCHES NOMINAL | | SPECIAL FEATURES | TWO ADDITIONAL HOLES ON CENTER SECTION,0.405 IN. MIN AND 0.418 IN. MAX DIA | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SW32906,CAGEC 98255 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PRIMER |
|
|