|
|
|
National Stock Number:
5340-01-372-3058
Federal Supply Class:
5340
National Item Identification Number:
013723058
Description:
RETAINER,HELICAL COMPRESSION SPR
Detail:
A CYLINDRICAL ITEM SPECIFICALLY DESIGNED TO FIT OVER THE END OF, AND COMPLETELY ENCASE THE SPRING. THE OPEN END IS USUALLY FLANGED, THE OPPOSITE END MAY BE CLOSED OR HAVE AN ORIFICE TO ACCOMMODATE A GUIDE, PLUNGER, OR THE LIKE. IT IS USED TO POSITION THE SPRING AND RESTRAIN LATERAL MOTION. IT MAY PROVIDE A SEAT FOR THE SPRING. EXCLUDES HOLDER, SPRING.
|
Manufacturer Information:
| 5497664-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5497664-1 | 70236 | TACTAIR FLUID CONTROLS INC | | 5497664-1 | 99215 | KAISER FLUID TECHNOLOGIES INC. |
|
Techincal Specification:
| END HOLE DIAMETER | 0.219 INCHES MINIMUM AND 0.221 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 1.020 INCHES NOMINAL | | CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE DIAMETER | 1.110 INCHES MINIMUM AND 1.150 INCHES MAXIMUM | | FLANGE THICKNESS | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | LIP THICKNESS | 1.215 INCHES NOMINAL | | OVERALL HEIGHT | 1.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CLASS 316 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 316 | | MOUNTING HOLE DIAMETER | 0.047 INCHES MINIMUM AND 0.064 INCHES MAXIMUM | | SPECIAL FEATURES | PASSIVATION ALTERNATIVE,TY 1 OR TY 3; THREAD 0.750-20 UNEF-3B; BODY I.D IS 0.62 X 0.50; 0.240 IN FROM FLANGE TO EDGE OF OPENING ALONG LENGTH | | STYLE DESIGNATOR | PARALLEL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|