| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 60.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 56.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 75.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 21.0 MILLIMETERS MINIMUM AND 23.0 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 235.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 13.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 101.0 MILLIMETERS MINIMUM AND 104.0 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A656 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A570 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| SPECIAL FEATURES | 2 X 11.0 MM WIDE BY 2X 25.0 MM LG SLOTS ON FIRST LEG |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 125.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 25.0 MILLIMETERS NOMINAL |
| SECOND LEG END WIDTH | 235.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| SECOND LEG HOLE DIAMETER | 17.5 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 96.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 25.0 MILLIMETERS NOMINAL |
| SECOND LEG THICKNESS | 0.312 INCHES NOMINAL |
| SECOND LEG WIDTH | 235.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 233.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | ANGLE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |