| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 1.062 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.067 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.766 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.093 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.080 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.380 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.280 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG CUTOUT LENGTH | 0.280 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.875 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.213 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.190 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.380 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CUT OUT |
| STYLE DESIGNATOR | ANGLE |
| SPECIAL FEATURES | SECOND LEG CUT-A-WAY 1.000 INCH FROM EDGE ALONG WIDTH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |