|
|
|
National Stock Number:
5340-01-374-0415
Federal Supply Class:
5340
National Item Identification Number:
013740415
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| P4078894 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 8.240 INCHES MINIMUM AND 8.260 INCHES MAXIMUM | | CENTER SECTION THICKNESS | 0.8125 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.219 INCHES NOMINAL | | FIRST LEG LENGTH | 2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM | | FIRST LEG WIDTH | 8.240 INCHES MINIMUM AND 8.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG THICKNESS | 0.219 INCHES NOMINAL | | SECOND LEG LENGTH | 2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 TY 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ZINC AND CHROMATE |
|
|