| FIRST LEG ANGLE | 10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.690 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.620 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.765 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.690 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE AND TAPERED |
| FIRST LEG THICKNESS | 0.135 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.380 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.680 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQS766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 |
| SECOND LEG END WIDTH | 0.380 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.120 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.690 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.135 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.380 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.820 INCHES MINIMUM AND 1.940 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ+35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |