|
|
|
National Stock Number:
5340-01-449-1661
Federal Supply Class:
5340
National Item Identification Number:
014491661
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 2630886 | 0MLM6 | MARINE CORPS SYSTEMS COMMAND PROGRAM MANAGER ASSAULT AMPHIBIOUS VEHICLE | | 2630886 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.6200 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.1250 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.5000 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.3100 INCHES NOMINAL | | FIRST LEG ANGLE | 0.3800 RADIANS NOMINAL | | FIRST LEG LENGTH | 1.0000 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.5000 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.1880 INCHES MINIMUM AND 0.2570 INCHES MAXIMUM | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.1250 INCHES NOMINAL | | FIRST LEG WIDTH | 1.5000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-Q-200/4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/5 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 0.3800 RADIANS NOMINAL | | SECOND LEG LENGTH | 1.0000 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG THICKNESS | 0.1250 INCHES NOMINAL | | SECOND LEG WIDTH | 1.5000 INCHES NOMINAL | | SPECIAL FEATURES | THERE IS A HOLE LOCATED IN CENTER PIECE THAT IS LOCATED 1.3100 IN. FROM SIDE TO CENTER OF WHOLE; IT HAS A DIA. OF MIN. 0.3860 IN. AND MAX. 04380 IN. | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|