|
|
|
National Stock Number:
5340-01-449-6381
Federal Supply Class:
5340
National Item Identification Number:
014496381
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
|
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.2500 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.0630 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.2500 INCHES NOMINAL | | FIRST LEG ANGLE | 0.1200 RADIANS NOMINAL | | FIRST LEG LENGTH | 1.7500 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.0630 INCHES NOMINAL | | FIRST LEG WIDTH | 2.2500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 0.1200 RADIANS NOMINAL | | SECOND LEG LENGTH | 1.7500 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.0630 INCHES NOMINAL | | SPECIAL FEATURES | THERE ARE TWO HOLES WITH DIA. OF MIN. 0.2600 IN. AND 0.2670 IN. MAX.;THEY ARE LOCATED ON THE CENTER PIECE FROM THE SIDE TO THE CENTER OF HOLE IS 0.5600 IN. AND 0.6200 IN. FROM END TO CENTER OF HOLE AND 1.0000 IN. FROM CENTER OF FIRST HOLE TO CENTER OF SECOND HOLE | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|