| CENTER SECTION HEIGHT | 0.5500 INCHES MINIMUM AND 0.5700 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.0080 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.1700 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.1700 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM |
| FIRST LEG CORNER RADIUS | 0.0400 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.2800 INCHES MINIMUM AND 0.3000 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.1610 INCHES NOMINAL |
| FIRST LEG OFFSET ANGLE | 0.0150 RADIANS MINIMUM AND 0.0450 RADIANS MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.0080 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-766 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 301 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 0.0150 RADIANS MINIMUM AND 0.0450 RADIANS MAXIMUM |
| SECOND LEG CORNER RADIUS | 0.0400 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.0080 INCHES NOMINAL |
| SECOND LEG STYLE | CORNER RADIUS |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35, TY 6 OR TY 7 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |