| CENTER SECTION HEIGHT | 50.8 MILLIMETERS NOMINAL |
| CENTER SECTION THICKNESS | 3.302 MILLIMETERS NOMINAL |
| CENTER SECTION WIDTH | 190.5 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 69.9 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 25.4 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 9.1 MILLIMETERS MINIMUM AND 9.9 MILLIMETERS MAXIMUM |
| FIRST LEG LENGTH | 50.8 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 19.1 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 3.302 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 190.5 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM-B-221 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6063 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 69.9 MILLIMETERS NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 50.8 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT WIDTH | 9.1 MILLIMETERS MINIMUM AND 9.9 MILLIMETERS MAXIMUM |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG END WIDTH | 158.7 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG THICKNESS | 50.8 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 190.5 MILLIMETERS NOMINAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |