| FIRST LEG ANGLE | 0.1600 RADIANS MINIMUM AND 0.1900 RADIANS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2180 INCHES MINIMUM AND 0.2240 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.3500 INCHES MINIMUM AND 0.4100 INCHES MAXIMUM |
| FIRST LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST LEG LENGTH | 0.7500 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM |
| FIRST LEG END WIDTH | 0.2800 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.2180 INCHES MINIMUM AND 0.2240 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.7200 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.0400 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 301 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2800 INCHES MINIMUM AND 0.3400 INCHES MAXIMUM |
| SECOND LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.2180 INCHES MINIMUM AND 0.2240 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.1500 INCHES MINIMUM AND 0.2100 INCHES MAXIMUM |
| SECOND LEG END WIDTH | 0.2800 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.0400 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.7200 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.2500 INCHES MINIMUM AND 1.3700 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |