|
|
|
National Stock Number:
5340-01-457-5882
Federal Supply Class:
5340
National Item Identification Number:
014575882
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 17P9E2006-1143 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.5000 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.0630 INCHES NOMINAL | | CENTER SECTION WIDTH | 5.2500 INCHES NOMINAL | | FIRST LEG ANGLE | 0.19 RADIANS NOMINAL | | FIRST LEG LENGTH | 0.3800 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.0630 INCHES NOMINAL | | FIRST LEG WIDTH | 5.2500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SECOND LEG ANGLE | 0.19 RADIANS NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG LENGTH | 0.3800 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.0630 INCHES NOMINAL | | SPECIAL FEATURES | THER ARE FOUR HOLES LOCATED ON TOP OF PIECE THE OTHER TWO HAVE A DIA. OF0.193 IN. MIN. AND 0.208 IN. MAX.; THE INNER TWO HOLES HAVE A DIA. OF 0.240 IN. MIN. AND 0260 IN. MAX. | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|