| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.2500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.5000 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.25 RADIANS NOMINAL |
| FIRST LEG LENGTH | 1.5000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.3750 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.2790 INCHES MINIMUM AND 0.2870 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.1200 INCHES NOMINAL |
| FIRST LEG WIDTH | 6.0000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-366 ASSN STD SINGLE MATERIAL RESPONSE OR STM-A-569 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1009 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.2500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.3750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.3750 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 1.3800 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.2500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.9970 INCHES MINIMUM AND 1.0100 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.1200 INCHES NOMINAL |
| SECOND LEG WIDTH | 6.0000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171, FINISH 5.1.1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PHOSPHATE ZINC |