| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2500 INCHES NOMINAL |
| FIRST LEG ANGLE | 55.0 DEGREES MINIMUM AND 65.0 DEGREES MAXIMUM |
| FIRST LEG CHAMFER ANGLE | 0.25 RADIANS NOMINAL |
| FIRST LEG LENGTH | 1.5000 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.6880 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.5000 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.5000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| FIRST LEG SLOT WIDTH | 0.4380 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.2500 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.0000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/6 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM-B-209 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-A-250/7 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM-B-221 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.5000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.5000 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.2500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.4060 INCHES MINIMUM AND 0.4700 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.5000 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.0000 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |