|
|
|
National Stock Number:
5340-01-458-5405
Federal Supply Class:
5340
National Item Identification Number:
014585405
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 210308-1 | 60168 | ENJET AERO DAYTON INC | | LZ1019 | 80477 | ADAMS RITE AEROSPACE, INC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 2.4000 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.0630 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.7500 INCHES NOMINAL | | FIRST LEG ANGLE | 0.06 RADIANS NOMINAL | | FIRST LEG LENGTH | 0.5400 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.0630 INCHES NOMINAL | | FIRST LEG WIDTH | 1.7500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766, COND A FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 OR STEEL COMP 303 | | SECOND LEG ANGLE | 0.06 RADIANS NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG LENGTH | 0.5400 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.0630 INCHES NOMINAL | | SPECIAL FEATURES | THERE ARE TWO HOLES LOCATED ON TOP OF PIECE WITH A DIA. OF 0.180 IN. WITH A VARIOUS OF PLUS 0.005 IN. AND MINUS 0.001IN.; THEY ARE LOCATED 0.44 IN. FORM ENDS AND 0.875 FROM CENTER TO CENTER OF HOLES WIDTH AND 1,250 IN CENTER TO CENTER ALONG WITH LENGTH | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|