| CENTER SECTION HEIGHT | 2.1200 INCHES MINIMUM AND 2.2000 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.0630 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.09 RADIANS MINIMUM AND 0.13 RADIANS MAXIMUM |
| FIRST LEG LENGTH | 0.7800 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG THICKNESS | 0.0630 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG ANGLE | 0.09 RADIANS MINIMUM AND 0.13 RADIANS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG LENGTH | 0.7800 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.0630 INCHES NOMINAL |
| SPECIAL FEATURES | THERE ARE FOUR ON THE TOP OF PIECE; THERE DIAMETER IS 0.1660 IN. MIN. AND 0.1750 IN. MAX.; THEY ARE LOCATED 0.45 IN. FROMLEFT SIDE TO CENTER OF HOLE AND 1.2500 IN. FROM CENTER OF HOLE TO CENTER OF HOLE FROM LEFT SIDE AND1.5500 IN. FROM CENTER TO CENTER ALONG WITH THE LENGTH AND 1.5850 IN FROM RIGHT END TO CENTER OF HOLE |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |