| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.0000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2400 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM |
| FIRST LEG ANGLE | 0.24 RADIANS MINIMUM AND 0.26 RADIANS MAXIMUM |
| FIRST LEG LENGTH | 0.7200 INCHES MINIMUM AND 0.7800 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.2400 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.1100 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.0600 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.4700 INCHES MINIMUM AND 1.5300 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.7800 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.7900 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.7400 INCHES MINIMUM AND 1.8000 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG END WIDTH | 1.1900 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.9700 INCHES MINIMUM AND 1.0300 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.0600 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.0300 INCHES MINIMUM AND 2.0900 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |