| CENTER SECTION HEIGHT | 2.2800 INCHES MINIMUM AND 2.3400 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.0900 INCHES NOMINAL |
| CENTER SECTION WIDTH | 14.5900 INCHES MINIMUM AND 14.8300 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.2500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.8530 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.22 RADIANS MINIMUM AND 0.28 RADIANS MAXIMUM |
| FIRST LEG LENGTH | 0.7300 INCHES MINIMUM AND 0.8500 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.6250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.3560 INCHES MINIMUM AND 0.3680 INCHES MAXIMUM |
| FIRST LEG WIDTH | 9.4600 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.0900 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG ANGLE | 0.22 RADIANS MINIMUM AND 0.28 RADIANS MAXIMUM |
| SECOND LEG LENGTH | 1.1900 INCHES MINIMUM AND 1.3100 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG THICKNESS | 0.0900 INCHES NOMINAL |
| SECOND LEG WIDTH | 7.6500 INCHES MINIMUM AND 7.7700 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171, 7.3.1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |