|
|
|
National Stock Number:
5340-01-459-3148
Federal Supply Class:
5340
National Item Identification Number:
014593148
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| SM-D-802136 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.2900 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.0630 INCHES NOMINAL | | CENTER SECTION WIDTH | 0.3800 INCHES NOMINAL | | FIRST LEG ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG END WIDTH | 0.1200 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.0630 INCHES NOMINAL | | FIRST LEG WIDTH | 0.3800 INCHES NOMINAL | | FIRST LEG LENGTH | 0.2400 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SECOND LEG ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG LENGTH | 0.8900 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.0630 INCHES NOMINAL | | SECOND LEG WIDTH | 0.3800 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CL 1A MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|