| FIRST LEG ANGLE | 0.06 RADIANS MINIMUM AND 0.09 RADIANS MAXIMUM |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 3.4500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.0660 INCHES MINIMUM AND 0.0710 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 3.4500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.1000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.0100 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.0400 INCHES NOMINAL |
| FIRST LEG WIDTH | 7.0700 INCHES MINIMUM AND 7.1300 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.2200 INCHES MINIMUM AND 0.2800 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| SECOND LEG END WIDTH | 6.3400 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG LENGTH | 0.4700 INCHES MINIMUM AND 0.5500 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.0400 INCHES NOMINAL |
| SECOND LEG WIDTH | 7.0700 INCHES MINIMUM AND 7.1300 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541, CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |