| FIRST LEG ANGLE | 0.35 RADIANS MINIMUM AND 0.41 RADIANS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.0000 INCHES NOMINAL |
| FIRST LEG END WIDTH | 2.5000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 1.4800 INCHES MINIMUM AND 1.5200 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.1250 INCHES NOMINAL |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.1250 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.9700 INCHES MINIMUM AND 4.0300 INCHES MAXIMUM |
| FIRST LEG LENGTH | 2.9700 INCHES MINIMUM AND 3.0300 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 2.9800 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.5600 INCHES NOMINAL |
| SECOND LEG END WIDTH | 0.3200 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.3700 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.7600 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.5600 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.1250 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.6000 INCHES MINIMUM AND 3.6400 INCHES MAXIMUM |
| SECOND LEG LENGTH | 6.1200 INCHES MINIMUM AND 6.1800 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE AND TAPERED |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ,ILSTD-171, FIN. 7.3.1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |