| FIRST LEG ANGLE | 0.47 RADIANS MINIMUM AND 0.53 RADIANS MAXIMUM |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.6500 INCHES NOMINAL |
| FIRST LEG END WIDTH | 4.5500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.3540 INCHES MINIMUM AND 0.3680 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.7500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.7500 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.9000 INCHES NOMINAL |
| FIRST LEG WIDTH | 5.0500 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.1400 INCHES MINIMUM AND 2.2400 INCHES MAXIMUM |
| MATERIAL | ALUMINUM ALLOY 6061 |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.2180 INCHES MINIMUM AND 0.2320 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.5000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.3500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.6930 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.9000 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.8900 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.2000 INCHES MINIMUM AND 5.3000 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171, 7.3.1 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |