| FIRST LEG ANGLE | 0.25 RADIANS NOMINAL |
| FIRST LEG CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.3725 INCHES NOMINAL |
| FIRST LEG END WIDTH | 4.8800 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 4.3750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.2900 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.1250 INCHES NOMINAL |
| FIRST LEG WIDTH | 5.1200 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.3500 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.3800 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.2190 INCHES MINIMUM AND 0.2230 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| SECOND LEG CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| SECOND LEG END WIDTH | 4.8800 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.1280 INCHES MINIMUM AND 0.2230 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.4060 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.4400 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.3600 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.1250 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.1200 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.0650 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-TD-171, FIN. 7.3.3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |